Cleaning mold from grout can be simple and cost-effective.
- I mix a solution of one part bleach to four parts water.
- With safety glasses on, I use an old toothbrush to scrub the grout lines.
- I let the bleach sit for 30 minutes to penetrate the mold spores.
- After scrubbing, I rinse the area with water and allow it to dry.
- For maintenance, I keep the area dry and use a dehumidifier to prevent new mold growth.
To successfully clean mold from grout, I first ensure I have my bleach solution mixed and ready for use. I put on my safety glasses to protect my eyes from any splashes. Then, I apply the bleach mixture to the affected grout areas and give it time to work its magic, making sure I have a good half-hour for it to soak in deeply.
Next, I get my hands on a sturdy toothbrush and go to town on the moldy grout, ensuring that I scrub well to remove all the mold and grime. Once done, I thoroughly rinse the area with water to wash away all the mold residues. To finish up, I dry off the surface and keep the space well-ventilated with the help of a dehumidifier to prevent future mold outbreaks, ensuring my grout remains sparkly, clean, and healthy for my household.
Mold or mildew grows everywhere there is enough humidity. It grows in rainforests, and it grows in your shower. It can grow wherever there is even a little humidity, as the spores float in the air around you, so this is why we might need to know how to clean mold from grout and tiles. Audrey Dunbar, a seasoned authority in home improvement, advises, “I always tell people that understanding the environments where mold thrives is key to preventing its growth in your home.”
Mold is also a health hazard, and we need to get rid of it as soon as possible to keep it from spreading and harming our loved ones. However, we do not need to rely on expensive chemicals, as there are natural means to take care of this problem.
We can ensure our good health with hydrogen peroxide, baking soda paste, and a little elbow grease to remove nasty mold. These house cleaning tricks are necessary because mold grows on the grout lines on your shower walls and even the caulking around your tub.
Cleaning Moldy Grout
As long as you have the appropriate materials and a little time, you can take care of the mold you may find in the grout in your bathroom, kitchen, or floor tiles. Our solutions help you remove mold from basement walls or the tile in the cellar bathroom with ease. You don’t have to worry about endangering the health of your family with our trusty mold remover recipes.
Using Bleach to Remove Mildew
For grout that is white beside white tiles, we suggest a recipe of bleach and water. You can effectively clean tile grout, kill the mold fast and clean up the shower at the same time with this most basic of household cleaning agents.
This is a good basic recipe for making the most out of your grout cleaner needs. Mix the ingredients in a plastic bucket while wearing safety glasses. After you rub the paste on the mold, let the bleach sit for at least a half-hour to soak into mold spores and other dirt.
Find an old toothbrush. Soak it in the bucket of vinegar and water, and use your scrub brush on the mold. Let it sit for 30 minutes, and attack it again. The now-dead mold and soap scum should come off without a problem.
After this, you should feel safe showering once again. If you have more mold in the house, like in the laundry room, you need to know what gets rid of mold elsewhere in the house. These recipes prevent mold build up in the future, so we don’t breathe in mold spores.
How to Get Rid of Mold in the Shower
This solution is a baking soda paste made with other ingredients that will help with mold removal. It’s also ideal for getting a mold smell out of the bathroom and is one of the many uses of hydrogen peroxide and baking soda. Read below and give it a try.
Mix these ingredients in a suitable bowl. Make sure there is no water present, as the mold loves wet and humid places. Wait five minutes before applying it.
Apply the paste on each section of mold and wait half an hour for the paste to affect the mold. Clean mold with a brush with a stiff bristle. A toothbrush will do in most circumstances.
Be careful not to damage the tile grout. Do not wash it down with the showerhead until the next day. Warm water and a little pressure should get rid of the rest of the dead mold.
If your problem with mold is on the outside of your house, you’ll have to use an exterior house washing solution. Many of these recipes use similar ingredients to take care of outdoor mold.
Get Rid of Moldy Shower Grout
If you have some tea tree oil at home, this recipe is an easy way to learn how to get rid of mold in shower grout. Do not rinse this recipe away quickly. It has to sit and kill the mold over a few hours.
Mix this cleaning solution in a spray bottle and shake it up a bit. Before you spray it on the tile, make sure the grout is dry. You might want to run a dry cloth across it first to make sure.
Grab an old toothbrush, scrub away, and your mold problem will disappear. All it takes is some scrubbing of the grime on your grout. That’s how to remove mold from grout.
Distilled White Vinegar and Water for Colored Grout
Vinegar is somewhat acidic, and so it will kill the mold growth. It should also not harm any colored grout.
Mix equal parts warm water and white vinegar in a spray bottle. Spray the solution liberally on the grout and shower tiles and give it 20 minutes to soak into the grout mold. Scrub away at the grout mold with an old toothbrush or other brush.
This is an excellent method to remove mildew from grout without expensive cleaning agents and just a bit of elbow grease and time. Find additional hints for cleaning black mold out of the grout with vinegar for mold in the shower and other areas of the home. Use this remedy for removing mold from the bathroom ceiling and other bathroom spots, too.
Removing Moldy Grout Lines
How to get mold out of grout lines, especially black mold, can be challenging. Attack the black mold with this recipe.
Put on some gloves and goggles and some old clothes, mix the ingredients in a spray bottle and use the whole thing on the black mold. Do not give it a chance to survive. After 30 minutes, scrub it with a tool with hard bristles.
You can use a lot of force if necessary, as it needs to come off for your long term health. However, if you aren’t sure that it came off entirely, use a DIY tile grout cleaner for any remaining mold.
Another Way to Get Rid of Black Spots
You can combine Lysol, baking soda, and Borax to make another surefire way to eradicate your black mold.
Mix the ingredients in a suitable container. They shouldn’t need much time to mix, and you needn’t wait before applying them. Place the paste on the black mold areas and scrub.
The black mold should lift off instantly, and once it is gone, follow our tips on how to prevent it in the future. You won’t even need any additional cleaning products.
How to Ensure Mold-Free Grout
Having mold free grout boils down to keeping the humidity out of the bathroom. You can buy a dehumidifier and keep it running, or keep the door to the bathroom open.
Both of these methods will keep the moisture levels below what mold needs to grow. Even just turning on the bathroom fan could work to avoid mold growth. Any way to keep the air moving through the bathroom, and the moisture out of it is an excellent idea.
A shower squeegee can help to remove excess moisture. You may use a tile primer that is water-resistant to paint the moldy area with it. That should ensure no mold ever grows there again.
If you encounter extremely moldy grout that resists your cleaning efforts, it may be time to remove old grout from tiles and replace it with new. Sometimes starting over can be the most efficient option.
How to clean mold from grout can be a challenge, so share the information on mold removal with friends on Pinterest and Facebook so they can benefit, too.