We’ve all been there at some point – one minute you’re rocking your latest DIY fix-it project around the house using Gorilla Glue, and the next minute you’re in a sticky situation with glue all over your hands. Read on to learn how to remove Gorilla Glue from skin.
Gorilla Glue is one of the best adhesives available for household repairs, home improvement, and craft projects. But since it dries very quickly, it is sometimes challenging to remove if you get it in the wrong place.
Don’t worry; we have several practical solutions for this common problem. When gluing accidents happen, use everyday household cleaning products to quickly and efficiently take care of the mess.
We teach you precisely how to remove Gorilla Glue from skin using products you already have in your house. Many home remedies suit your needs, even if you have extremely sensitive skin.
- Learn the Best Way to Get Gorilla Glue Off Your Skin
- Find Out How to Get Gorilla Glue Off Skin without Nail Polish Remover
- Safety Tips for Removing Gorilla Glue from Skin
Learn the Best Way to Get Gorilla Glue Off Your Skin
Gorilla Glue, along with super glue, is part of a group of fast-acting adhesives called cyanoacrylate.
Gorilla Super Glue is one of the most durable and longest-lasting adhesives on the market, and it’s also designed for easy clean-up with common household solvents in case you accidentally get it on your skin or other surfaces.
The removal process is the same for Krazy Glue, polyurethane glue, and wood glue as well. Gorilla Glue dries extremely fast, so it’s a good idea to keep a paper towel or cleaning rag handy while gluing so that you’re able to wipe up any spills before they dry.
Quickly cleaning up accidental spills while the glue is still wet is the easiest and most efficient way to get Gorilla Glue off skin and other surfaces.
Try one of the following DIY recipes for homemade adhesive remover for skin next time you get Gorilla Glue on your hands during a project.
How to Remove Gorilla Glue from Skin with Acetone
You may have heard of using acetone products like nail polish remover or paint thinner to remove dried Gorilla Glue on your hands or another part of your body.
In most cases, acetone is the quickest and best way to get Gorilla Glue off your skin. Here are some simple steps for using acetone to get Gorilla Glue off skin.
Soak the affected area in acetone for five to ten minutes to loosen the glue. If it’s not practical to soak the affected body part directly in the acetone, saturate a soft cloth or paper towel and hold it on the area.
Dip a cotton ball in the acetone solution and gently scrub the glue to remove it, then wash your skin with warm soapy water.
Find Out How to Get Gorilla Glue Off Skin without Nail Polish Remover
For people with sensitive skin, acetone is sometimes irritating and results in dry, cracked skin or a painful rash. You may wonder what takes Gorilla Glue off skin that doesn’t have harsh chemicals or irritants.
It is possible to remove Gorilla Glue from skin without acetone. Find out what takes Gorilla Glue off skin without generating an unpleasant reaction.
Soak Your Hands in Warm Soapy Water
If you catch it before it’s fully dry, warm soapy water works to remove Gorilla Glue from skin. It’s also beneficial to keep a bit of soapy water on hand during your project to clean up accidental spills.
Add liquid soap to a basin of warm water. Soak the affected area in the soapy water for at least five minutes. Drain or pour out the basin, refill it with fresh soap and warm water, and soak again. Scrub the affected skin to remove the glue.
If the Gorilla Glue has already dried on your skin, it’s still a good idea to soak your skin in soapy water to loosen the glue. Then, try one of the following processes to clean Gorilla Glue from skin.
Remove Gorilla Glue through Exfoliation or Abrasion
After soaking the affected area, sometimes all you need to get Gorilla Glue off skin is a little bit of elbow grease. Use an abrasive object like a pumice stone, a knife sharpening stone, sandpaper, or a piece of wood (but be careful to avoid getting splinters).
Employ a firm, slow motion to keep from tearing your skin, change directions often, and alternate rubbing with your fingers to help prevent friction burns. Alternatively, make an exfoliating scrub using simple household ingredients.
Apply this mixture liberally to the affected area and keep gently scrubbing your skin until the glue is gone.
Adding rubbing alcohol to this exfoliating scrub helps to keep the sea salt from dissolving. The citric acid in lemon essential oil also helps to dissolve Gorilla Glue.
Get Gorilla Glue Off Skin with Olive Oil
Olive oil, coconut oil, or vegetable oil is effective to clean Gorilla Glue from skin without causing irritation. This method is also suitable for removing dried Gorilla Glue from delicate surfaces without damaging them.
Stir the olive oil and baking soda in a small, resealable container until it forms a paste with a similar consistency to cake frosting.
Heat the paste in the microwave for 10-15 seconds to warm the oil. Apply the mixture generously to the affected area and gently scrub with your fingers or a soft-bristled brush.
Olive oil is also a useful technique for removing hair dye from skin andother types of stains.
How to Remove Gorilla Glue from Skin with Rubbing Alcohol
Rubbing alcohol works to dissolve Gorilla Glue if it’s already dry but hasn’t been on your skin for long enough yet to fully cure. The curing process takes several hours. Use 70-90% rubbing alcohol for the best results.
Completely saturate a cotton ball or paper towel with rubbing alcohol, and scrub the affected area with the cotton ball. Repeat this process until you remove all the glue from your skin.
Remove Gorilla Glue Off Skin with Lemon Juice
The citric acid in lemon juice dissolves Gorilla Glue. It may require several attempts to dissolve the bond fully, but be patient.
Saturate a cotton ball or paper towel with lemon juice. Apply the cotton ball to the affected area and let it sit for at least 15 minutes to loosen the glue. Scrub the area to remove the glue. Repeat the process as necessary.
Get Gorilla Glue Off Your Skin with Petroleum Jelly
Since Gorilla Glue is polyurethane-based, petroleum products loosen the glue from your skin so that you can safely remove it without hurting yourself. Using petroleum jelly to remove Gorilla Glue is especially helpful if your fingers are stuck together.
Apply petroleum jelly liberally to the affected area and gently rub the glued skin with your fingers, a cotton ball, or a soft-bristled brush until the glue comes off.
Repeat this process until all of the glue is removed. Use petroleum jelly for removing hair dye from skin, as well, but be sure to rinse completely.
Safety Tips for Removing Gorilla Glue from Skin
It’s imperative to comment on safety when trying to remove Gorilla Glue from your skin. Gorilla Glue is a potent adhesive, and you might damage your skin if you try to remove it too fast.
While Gorilla Glue is the go-to adhesive for DIY projects and household fixes, things get messy fast when there are inadvertent spills. It’s important to use caution when handling fast-drying products, but gluing accidents happen.
However, even if you do get Gorilla Glue on your skin or other surfaces, it’s relatively straightforward to remove when you know what you’re doing. There are plenty of options for how to remove Gorilla Glue from skin, so choose the approach that works best for you.
The best way to get Gorilla Glue off your skin depends on what you already have at home, how sensitive your skin is, and how long it’s been in contact with your skin.
If you found these tips and tricks for getting Gorilla Glue off skin useful, please don’t hesitate to share this article about how to remove Gorilla Glue from skin on Facebook and Pinterest with your friends and family who are DIY enthusiasts.